The Infiniti Q60 is a sport-luxury coupe that evolved from the G and earlier Q60 line, and its Intelligent Key changed FCC across the run. That matters because a coupe like this draws younger, harder-driving owners, and the typical call is not a worn ignition but a fob that has been dropped one too many times. Getting the right replacement starts with matching the fob to the model year rather than trusting the badge.
We are a mobile automotive locksmith and bring the work to wherever the Q60 is parked, whether that is a Bulloch County driveway, a lot at Statesboro Crossing, or a space off Brampton Avenue. This guide covers what the Q60 uses in each era, how a lost-key visit runs, why cracked fobs need attention early, and how to tell a dead fob battery from a real programming fault.
Q60 Generations and What Each One Uses
The 2014-2015 cars, carried over from the G and earlier Q60 line, use the NSN14 emergency blade with the KR55WK48903 or CWTWB1U787 Intelligent Key. The coupe starts from a button, with the metal blade tucked in the fob as a door backup.
The 2017-2022 Q60 moves to the KR5S180144014 fob, still on the NSN14 blade. Because the fob FCC changed across the run, matching the exact key to your year is the first step, since a fob for the wrong era will not pair even when the blade fits the lock.
Infiniti Q60 Keys and Fobs by Generation
The Q60 has used Intelligent Keys on the NSN14 emergency blade, but the fob FCC changed across its run, so the right one depends on your year. We confirm the exact part by VIN before driving out anywhere in the Statesboro area so the new key matches your car.
NSN14 emergency blade. FCC: KR55WK48903 / CWTWB1U787.
NSN14 emergency blade. FCC: KR5S180144014.
Proximity Fob Service for the Q60
The Q60 uses an Intelligent Key with push-to-start: with the fob in a pocket or bag, the doors unlock on touch and the coupe starts from the button. When it stops recognizing the fob, a weak coin cell is the first suspect and a pairing fault the second. Adding or replacing an Intelligent Key is a programming job, and we verify lock, unlock, and push-button start all respond before we leave.
Telling a Dead Q60 Fob Battery From a Programming Issue
Before assuming the worst, rule out the battery. The Q60 Intelligent Key runs on a CR2032 coin cell, and a weak one is the most common reason the remote stops responding from a distance or the coupe makes you hold the fob to the start button. A fresh cell often brings it back.
A real programming fault is different. If a new battery does not help, if the button presses but the engine will not start, or if a key or security light stays lit, the issue is on the immobilizer side and the key needs to be re-paired. A cracked fob whose board has been compromised by moisture can also fail, which a battery swap will not fix.
When the Q60 Ignition or Locks Act Up
Since the Q60 starts from a button, there is no turn-key ignition cylinder to wear, but the NSN14 emergency blade and the driver door lock still deserve attention. That blade is your way in when the fob battery dies, and a lock that has rarely been used can feel stiff the first time. We make sure the emergency blade is cut correctly and turns the door cleanly so your backup is ready when it counts.
All-Keys-Lost on the Infiniti Q60
Losing every working fob on a Q60 is a more involved visit than copying a spare, but one we handle on-site. With nothing to seed authentication, the programmer reads the immobilizer data from the coupe and enrolls a new Intelligent Key through the security system. We build the key from your VIN, cut the NSN14 emergency blade so the door backup works, pair the fob, and confirm the engine starts before we close out.
Because Q60 fobs take a beating on hard surfaces, an all-keys-lost can follow a cracked fob that finally quit, so we match the exact FCC to your year so the new key takes the first time.
Information We Need for a Q60 Key
- The model year of your Q60, since the fob FCC changed across the run.
- The VIN, visible through the lower windshield, so we can match the exact fob.
- How many working fobs you have, since a spare is a shorter job than an all-keys-lost visit.
- Whether your fob case is cracked, since moisture can finish a board even if it still works now.
- A photo ID and the registration or title, so we can verify the vehicle is yours before programming.
- Whether the trouble is the fob, the remote functions, or a locked door, so we bring the right tools.
The Case for a Second Q60 Key
If you still have one working fob, a planned spare is the smart move on a coupe whose fob lives a rough life. With a key on hand to seed the process, programming a second Intelligent Key is short and straightforward, and a Q60 running on a single fob is one cracked case or drained coin cell away from a much harder day. We make and pair spares on-site without a dealer appointment.
When to Use a Locksmith vs the Dealer
An Infiniti dealer can make a Q60 key, but it usually means getting the coupe to the dealership, waiting on an appointment, and leaving it on their schedule. As a mobile locksmith we bring the blanks, the programmer, and the correct Intelligent Key to you and finish the job in your driveway or a lot. If a particular case genuinely needs manufacturer coordination, we flag it when we confirm your VIN instead of after we arrive.
Common Q60 Situations Around Statesboro
Example. A younger owner off Brampton Avenue had a 2018 Q60 whose fob case had cracked on a hard surface and finally stopped responding. Moisture had reached the board; we matched the correct KR5S180144014 fob by VIN, paired it on-site, and recommended a spare.
Example. A driver at Statesboro Crossing found the only fob to a 2015 Q60 would not start the coupe. A weak CR2032 coin cell was the cause; we replaced it, confirmed push-button start, and made a spare.
Example. A Q60 along Veterans Memorial Parkway lost both fobs. With nothing to seed from, we read the immobilizer data, built the NSN14-bladed Intelligent Key from the VIN, enrolled it, and tested start and the door backup before leaving.
Serving Q60 Drivers Across Bulloch County
We serve Q60 owners across Statesboro and all of Bulloch County, coming to homes, workplaces, and lots rather than asking you to come to us. Whether the coupe sits off Fair Road, near East Main Street, along Veterans Memorial Parkway, or out toward US-301, we bring the service to the vehicle and aim to arrive with the right fob for your VIN the first time.
Other compact luxury sedans we service
Cross-shopping the Infiniti Q60 against other compact luxury sedans? We make and program keys for these comparable models too:
- Infiniti Q60 vs Lexus IS 350 / IS 250 key replacement
- Infiniti Q60 vs Lincoln MKZ / Zephyr key replacement
- Infiniti Q60 vs Mercedes-Benz C-Class key replacement
- Infiniti Q60 vs Volvo S60 key replacement
Helpful Service Pages
- all Infiniti car keys and models
- how proximity keys work
- smart key guide
- push-to-start key guide
- flip key guide
- high-security keys
- lost-all-keys VIN replacement
Common Infiniti Q60 Key Questions
Can you make an Infiniti Q60 key with no working fob?
Yes. When every fob is gone we read the immobilizer data, build the Intelligent Key from your VIN, and enroll it against the coupe. It is more involved than copying a spare, but for the Q60 it does not require a dealer visit in most cases.
My Q60 fob is cracked but still works. Should I replace it?
It is worth doing early. The board often survives the drop, but a cracked case lets moisture in, which can finish it later. Matching a replacement to your VIN now is easier than handling it after the fob quits entirely.
How do I know which Q60 key I need?
It comes down to the model year. The 2014-2015 cars use an earlier Intelligent Key, while the 2017-2022 cars use the later fob, both on the NSN14 blade. We confirm the exact fob by VIN before we head out.
My Q60 fob quit working. Is it the fob or the coupe?
Start with the battery. The Intelligent Key uses a CR2032 coin cell, and a weak one is the usual reason it stops responding from a distance. If a fresh cell does not help and a key warning stays lit, the fob likely needs to be re-paired.
What if the fob battery is dead and I am locked out?
The NSN14 emergency blade inside the Intelligent Key opens the driver door even with a flat battery. If you have lost that ability, we can cut the blade by VIN on-site, get you inside, and address the fob once you have access.
Do you come to me in the Statesboro area?
Yes. We are a mobile locksmith and come to your home, workplace, or wherever the Q60 is parked across Statesboro and Bulloch County. Call (912) 209-6131 and we will confirm your year and VIN before heading out so we bring the right fob.